Materials Testing
Category
1 litre capacity, plated steel with clamped baseplate and collar to BS 1377:4
The set consists of the following flakiness sieves all constructed from steel to meet the requirements of BS 812. Slot width Length Passing Retained 4.9mm 30mm 10mm 6.3mm 7.2mm 40mm 14mm 10mm 10.2mm 50mm 20mm 14mm 14.4mm 60mm 28mm 20mm 19.7mm 80mm 37.5mm 28mm 26.3mm 90mm 50mm 37.5mm 33.9mm 100mm 63mm 50mm
The apparatus consists of a support frame, 2 tapered rings, 2 ball centering guides, 2 steel balls and a heat resistant glass beaker. Note: heater/stirrer unit required
Used in the field for penetration resistance/compaction of fine grained soils. The penetrometer is spring loaded with direct reading in kg on a sliding rod. Complete with 9 interchangeable stainless steel needles in the following diameters: 4.52 – 5.23 – 6.40 – 9.07 – 12.83 – 16.54 – 20.22 – 24.79 – 28.55 mm Chrome …
Proctor PenetrometerRead More
Handheld, portable and easily used piece of field equipment to enable geotechnical engineers and technicians to provide accurate and meaningful results of shear strength in kilopascals (kPa). If used correctly it will also measure residual shear strength of cohesive soils (ie clays and silts). The 19mm vane blade range is approximately 180kPa. Dependant on the …
Hand Vane TesterRead More