Materials Testing
Category
It is made from plated steel including mould body, base and collar.
The Skid Resistance & Friction Tester is suitable for both site and laboratory applications to perform tests to the following standards: BS 812 Pt. 114 BS EN 1097-8 Determination of Polished Stone Value AS/NZS 4586:1999 Slip resistance classification of new pedestrian surface materials BS 6077 Pt 1 Clay and calcium silicate pavers for flexible pavements. …
Skid Resistance TesterRead More
Speedy moisture testers combine time proven dependability of the pressure test procedure with the convenience of an electric balance. Moisture measurements are obtained by following a simple test procedure: Prepare and weigh the material sample using the electronic balance. Place the sample in the Speedy vessel. Add the reagent to the recess in the Speedy …
Speedy Moisture MeterRead More
The 150mm ACV apparatus consists of steel cylinder with a nominal diameter of 150mm, a plunger, baseplate, tamping rod and measure. All surfaces that come into contact with the aggregate are cadmium plated against corrosion. The metal measure is 115mm diameter x 180mm deep. Used for aggregate passing 12.7mm and retained by a 9.52mm sieve. …
Aggregate Impact ValueRead More
Additional items required to perform the test such as load ring, flow dial gauge, breaking head stability mould etc. are not supplied as part of the Marshall load frame. The Marshall machine is a motorised load frame specifically designed to carry out Marshall tests. It is a bench-mounted system with a motorised drive. The speed …
Marshall Test Load FrameRead More