The apparatus consists of a support frame, 2 tapered rings, 2 ball centering guides, 2 steel balls and a heat resistant glass beaker.
Note: heater/stirrer unit required
Related products
-
Compacting Factor Apparatus
Read moreDefinition of Compacting Factor: The ratio of the weight of partially compacted concrete to the weight of the concrete when fully compacted in the same mould. The compacting factor apparatus consists of two conical hoppers each with a hinged trap with a quick release mechanism to allow free flow of the concrete sample. A cylindrical …
-
Jolting Table for Prism Compaction
Read moreUsed to compact 40mm x 40mm x 160mm cement mortar prisms in the three gang mould. The table consists of a platform holding the mould, seated on a rotating cam driven at 60 revolutions per minute. The jolting group is connected to the table by bayonet joints for quick checking of the weights. The150mm drop …
-
BRE Screed Tester
Read moreThe BRE Tester is designed to measure the soundness of a sand / cement floor screed as early as 14 days after laying. The device consists of a1m long, cylindrical guide rod, along which an annular weight of 4 kg (or 2kg) travels when released. At the bottom of the guide rod the weight strikes …
-
Aggregate Impact Value
Read moreThe 150mm ACV apparatus consists of steel cylinder with a nominal diameter of 150mm, a plunger, baseplate, tamping rod and measure. All surfaces that come into contact with the aggregate are cadmium plated against corrosion. The metal measure is 115mm diameter x 180mm deep. Used for aggregate passing 12.7mm and retained by a 9.52mm sieve. …
