It is made from plated steel including mould body, base and collar.
Related products
-
Riffle boxes
Read moreHeavy Gauge Sheet Steel Riffle Boxes with divider and 3 containers to BS812-1, BS1377-1, BS1377-2, BS1377-3, BS1377-4, BS598-2 Riffle Box, slot width 7mm, 12 slots Riffle Box, slot width 10mm, 12 slots Riffle Box, slot width 15mm, 12 slots Riffle Box, slot width 20mm, 10slots Riffle Box, slot width 25mm, 10slots Riffle Box, slot width …
-
Jolting Table for Prism Compaction
Read moreUsed to compact 40mm x 40mm x 160mm cement mortar prisms in the three gang mould. The table consists of a platform holding the mould, seated on a rotating cam driven at 60 revolutions per minute. The jolting group is connected to the table by bayonet joints for quick checking of the weights. The150mm drop …
-
Aggregate Impact Value
Read moreThe 150mm ACV apparatus consists of steel cylinder with a nominal diameter of 150mm, a plunger, baseplate, tamping rod and measure. All surfaces that come into contact with the aggregate are cadmium plated against corrosion. The metal measure is 115mm diameter x 180mm deep. Used for aggregate passing 12.7mm and retained by a 9.52mm sieve. …
-
Automatic Mortar Mixer
Read morePicture shows beater which must be ordered separately This hard wearing mixer is designed efficiently mix cement pastes and mortar, using three automatic mixing cycles, in compliance with: EN196/1, EN 196/3 and EN 480/1. It is possible to select either manual operation, or one of the two automatic programs. By operating automatically on changes …
