Materials Testing
Category
range 0.995 to 1.030g/ml 345mm long BS1377-2
The apparatus consists of a support frame, 2 tapered rings, 2 ball centering guides, 2 steel balls and a heat resistant glass beaker. Note: heater/stirrer unit required
The 150mm ACV apparatus consists of steel cylinder with a nominal diameter of 150mm, a plunger, baseplate, tamping rod and measure. All surfaces that come into contact with the aggregate are cadmium plated against corrosion. The metal measure is 115mm diameter x 180mm deep. Used for aggregate passing 12.7mm and retained by a 9.52mm sieve. …
Aggregate Impact ValueRead More
Additional items required to perform the test such as load ring, flow dial gauge, breaking head stability mould etc. are not supplied as part of the Marshall load frame. The Marshall machine is a motorised load frame specifically designed to carry out Marshall tests. It is a bench-mounted system with a motorised drive. The speed …
Marshall Test Load FrameRead More
Handheld, portable and easily used piece of field equipment to enable geotechnical engineers and technicians to provide accurate and meaningful results of shear strength in kilopascals (kPa). If used correctly it will also measure residual shear strength of cohesive soils (ie clays and silts). The 19mm vane blade range is approximately 180kPa. Dependant on the …
Hand Vane TesterRead More